PE Cosmetic Bottle 750ml
Download the complete PE / HDPE bottle catalog PDF.
Full engineering parameters for SJE0005-750. Nominal factory values — custom colors, printing and finishing available on all parameters below.
| Dimensions & Capacity | |
| Nominal Capacity | 750 ml (25.4 fl oz) |
| Overflow Capacity (brimful) | 792 ml (26.8 fl oz) |
| Bottle Weight | 70 g |
| Neck Finish | 32 mm |
| Total Height | 188 mm |
| Shoulder Height | 179 mm |
| Base (W × D) | 111 × 60 mm |
| Material & Compliance | |
| Material | PE/HDPE |
| Resin Grade | Food-contact, virgin (non-recycled) |
| Certifications | ISO 9001 / FDA / SGS |
| Recyclable | Yes |
| Packing & Order Info | |
| Carton Pack | Confirmed per order — contact us for exact carton specs |
| MOQ | 5,000 units |
| Lead Time | 15–25 days |
Typical applications for this large HDPE bottle: fabric softener, laundry detergent, household cleaners and high-volume refills. HDPE's chemical resistance and durability make it the standard for household-care packaging.
SJE0005-750 is a 750 ml PE / HDPE bottle in the family & refill size range. It suits sunscreen, opaque lotions, body wash and chemical-sensitive formulations, and is commonly specified for family-size body care, refill packs and value bundles. The 32 mm neck is compatible with standard screw, pump or flip-top closure, so it adapts to pump, spray or screw formats without mold changes.
For branding, silk-screen, hot-stamp and in-mold labeling are available on this PE / HDPE body. Pair it with a matching standard screw, pump or flip-top closure to complete a shelf-ready package at a 5,000 units MOQ, produced on ISO 9001 / FDA / SGS certified lines.
Everything below is calculated from the nominal dimensions in the specification table above (PE / HDPE, 750 ml ≈ 25.4 fl oz, Ø32 mm neck). These figures are engineering guidance for label sizing, closure matching and freight planning — they are not a separate product specification, and final tolerances are confirmed on your approved sample.
| Body geometry | |
| Body shape | Flat-oval body — 111 × 60 mm base (1.85 : 1 width-to-depth). Two parallel 111 mm faces carry front and back artwork, while the narrow 60 mm sides suit barcode, batch or ingredient panels. |
| Height to width | 1.69 : 1 (188 mm tall, 111 mm wide). Low-profile, wide-footed format: the most stable of the three under high-speed filling and the easiest to stack. |
| Fill-to-outline ratio | 750 ml stated capacity inside a 1,252 ml rectangular outline — 60 %. Typical wall and shoulder allowance for an injection- or extrusion-blown bottle of this size. Fill line is normally set at 90–95 % of stated capacity. |
| Unit weight | 70 g body weight = 9.3 g per 100 ml. Mid-weight range: the balance most buyers settle on between hand-feel and freight cost. |
| Label & decoration zone | |
| Usable label height | Up to 174 mm — from the base to the 179 mm shoulder line, less a 5 mm base transition. Taller artwork runs onto the shoulder with a curved-label option. |
| Front panel width | 111 mm flat face → artwork up to 103 mm wide with a 4 mm safety margin each side. |
| Recommended maximum label size | ≈ 103 × 174 mm (W × H) flat label on each face, or a wrap label over the 60 mm sides for tamper evidence. |
| Neck & closure | |
| Neck finish | Ø32 mm screw neck — the 32/410 industry standard, one of the most widely stocked closure sizes worldwide. |
| Dispensing options | high-output lotion pump or wide flip-top cap. |
| Dosing note | At 750 ml the Ø32 mm neck is the standard pairing and is normally run with a high-output pump or a wide-mouth fill opening. Tell us the dose you need per application (ml per stroke) and we match the pump or sprayer output to it. |
Nearest PE / HDPE formats to this 750 ml model (730 ml, 700 ml, 800 ml, 800 ml), so you can compare a capacity step up or down without leaving the family. Every row is a stocked SKU with its own page and drawings.
| SKU | Capacity | Weight | Neck | Height | Difference |
| SJE1670-800 | 800 ml | 76 g | Ø40 mm | 243 mm | +50 ml larger |
| SJE1759-800 | 800 ml | 75 g | Ø32 mm | 216 mm | +50 ml larger · same neck |
| SJE0005-750 | 750 ml | 70 g | Ø32 mm | 188 mm | This model |
| SJE1812-730 | 730 ml | 65 g | Ø32 mm | 190 mm | 20 ml smaller · same neck |
| SJE1901-700 | 700 ml | 72 g | Ø32 mm | 237 mm | 50 ml smaller · same neck |
Tell us your quantity and target market — our engineering team replies within 2 working hours with pricing, lead time and samples. No registration required.
