PE Cosmetic Bottle 125ml
Download the complete PE / HDPE bottle catalog PDF.
Full engineering parameters for SJE0034-125. Nominal factory values — custom colors, printing and finishing available on all parameters below.
| Dimensions & Capacity | |
| Nominal Capacity | 125 ml (4.2 fl oz) |
| Overflow Capacity (brimful) | 140 ml (4.7 fl oz) |
| Bottle Weight | 17 g |
| Neck Finish | 18 mm |
| Total Height | 134 mm |
| Shoulder Height | 115 mm |
| Base (W × D) | 58 × 30 mm |
| Material & Compliance | |
| Material | PE/HDPE |
| Resin Grade | Food-contact, virgin (non-recycled) |
| Certifications | ISO 9001 / FDA / SGS |
| Recyclable | Yes |
| Packing & Order Info | |
| Carton Pack | 615 pcs / carton |
| Carton Dimensions (L×W×H) | 76 × 50 × 42 cm |
| MOQ | 5,000 units |
| Lead Time | 15–25 days |
Typical applications for this small HDPE bottle: travel-size shampoo and conditioner, hand wash, lotion and personal-care samples. Squeezable HDPE is lightweight and drop-safe for travel and retail.
SJE0034-125 is a 125 ml PE / HDPE bottle in the daily face-care size range. It suits sunscreen, opaque lotions, body wash and chemical-sensitive formulations, and is commonly specified for facial serums, essences, toners and daily moisturizers. The 18 mm neck is compatible with an 18/415 fine-mist sprayer or small disc-top cap, so it adapts to pump, spray or screw formats without mold changes so it adapts to pump, spray or screw formats without mold changes.
For branding, silk-screen, hot-stamp and in-mold labeling are available on this PE / HDPE body. Pair it with a matching an 18/415 fine-mist sprayer or small disc-top cap to complete a shelf-ready package at a 5,000 units MOQ, produced on ISO 9001 / FDA / SGS certified lines.
Everything below is calculated from the nominal dimensions in the specification table above (PE / HDPE, 125 ml ≈ 4.2 fl oz, Ø18 mm neck). These figures are engineering guidance for label sizing, closure matching and freight planning — they are not a separate product specification, and final tolerances are confirmed on your approved sample.
| Body geometry | |
| Body shape | Flat-oval body — 58 × 30 mm base (1.93 : 1 width-to-depth). Two parallel 58 mm faces carry front and back artwork, while the narrow 30 mm sides suit barcode, batch or ingredient panels. |
| Height to width | 2.31 : 1 (134 mm tall, 58 mm wide). Mid-height format: stable on standard filling and labelling lines without rail changes. |
| Fill-to-outline ratio | 125 ml stated capacity inside a 233 ml rectangular outline — 54 %. Typical wall and shoulder allowance for an injection- or extrusion-blown bottle of this size. Fill line is normally set at 90–95 % of stated capacity. |
| Unit weight | 17 g body weight = 13.6 g per 100 ml. Mid-weight range: the balance most buyers settle on between hand-feel and freight cost. |
| Label & decoration zone | |
| Usable label height | Up to 110 mm — from the base to the 115 mm shoulder line, less a 5 mm base transition. Taller artwork runs onto the shoulder with a curved-label option. |
| Front panel width | 58 mm flat face → artwork up to 50 mm wide with a 4 mm safety margin each side. |
| Recommended maximum label size | ≈ 50 × 110 mm (W × H) flat label on each face, or a wrap label over the 30 mm sides for tamper evidence. |
| Neck & closure | |
| Neck finish | Ø18 mm screw neck — the 18/410 or 18/415 industry standard, one of the most widely stocked closure sizes worldwide. |
| Dispensing options | dropper, fine-mist sprayer or small disc-top cap. |
| Dosing note | At 125 ml the Ø18 mm neck is the standard pairing and is normally run with a single- or double-dose pump. Tell us the dose you need per application (ml per stroke) and we match the pump or sprayer output to it. |
Nearest PE / HDPE formats to this 125 ml model (120 ml, 120 ml, 130 ml, 150 ml), so you can compare a capacity step up or down without leaving the family. Every row is a stocked SKU with its own page and drawings.
| SKU | Capacity | Weight | Neck | Height | Difference |
| SJE0027-150 | 150 ml | 22 g | Ø28 mm | 107 mm | +25 ml larger |
| SJE0162-130 | 130 ml | 19 g | Ø20 mm | 127 mm | +5 ml larger |
| SJE0034-125 | 125 ml | 17 g | Ø18 mm | 134 mm | This model |
| SJE1905-120 | 120 ml | 21 g | Ø20 mm | 109 mm | 5 ml smaller |
| SJE1894-120 | 120 ml | 22 g | Ø24 mm | 129 mm | 5 ml smaller |
Tell us your quantity and target market — our engineering team replies within 2 working hours with pricing, lead time and samples. No registration required.
