PE Cosmetic Bottle 650ml
Download the complete PE / HDPE bottle catalog PDF.
Full engineering parameters for SJE0142-650. Nominal factory values — custom colors, printing and finishing available on all parameters below.
| Nominal Capacity | 650 ml (22.0 fl oz) |
| Dimensions & Capacity | |
| Overflow Capacity (brimful) | 650 ml (22.0 fl oz) |
| Bottle Weight | 55 g |
| Neck Finish | 32/410 |
| Total Height | 216 mm |
| Shoulder Height | 182.5 mm |
| Base (W × D) | 100.5 × 51.2 mm |
| Material & Compliance | |
| Material | PE/HDPE |
| Resin Grade | Food-contact, virgin (non-recycled) |
| Certifications | ISO 9001 / FDA / SGS |
| Recyclable | Yes |
| Packing & Order Info | |
| Carton Pack | Confirmed per order — contact us for exact carton specs |
| MOQ | 5,000 units |
| Lead Time | 15–25 days |
Typical applications for this large HDPE bottle: fabric softener, laundry detergent, household cleaners and high-volume refills. HDPE's chemical resistance and durability make it the standard for household-care packaging.
SJE0142-650 is a 650 ml PE / HDPE bottle in the family & refill size range. It suits sunscreen, opaque lotions, body wash and chemical-sensitive formulations, and is commonly specified for family-size body care, refill packs and value bundles. The 32 mm neck is compatible with standard screw, pump or flip-top closure, so it adapts to pump, spray or screw formats without mold changes.
For branding, silk-screen, hot-stamp and in-mold labeling are available on this PE / HDPE body. Pair it with a matching standard screw, pump or flip-top closure to complete a shelf-ready package at a 5,000 units MOQ, produced on ISO 9001 / FDA / SGS certified lines.
Everything below is calculated from the nominal dimensions in the specification table above (PE / HDPE, 650 ml ≈ 22.0 fl oz, Ø32 mm neck). These figures are engineering guidance for label sizing, closure matching and freight planning — they are not a separate product specification, and final tolerances are confirmed on your approved sample.
| Body geometry | |
| Body shape | Flat-oval body — 100 × 51 mm base (1.96 : 1 width-to-depth). Two parallel 100 mm faces carry front and back artwork, while the narrow 51 mm sides suit barcode, batch or ingredient panels. |
| Height to width | 2.15 : 1 (216 mm tall, 100 mm wide). Mid-height format: stable on standard filling and labelling lines without rail changes. |
| Fill-to-outline ratio | 650 ml stated capacity inside a 1,111 ml rectangular outline — 58 %. Typical wall and shoulder allowance for an injection- or extrusion-blown bottle of this size. Fill line is normally set at 90–95 % of stated capacity. |
| Unit weight | 55 g body weight = 8.5 g per 100 ml. Mid-weight range: the balance most buyers settle on between hand-feel and freight cost. |
| Label & decoration zone | |
| Front panel width | 100 mm flat face → artwork up to 92 mm wide with a 4 mm safety margin each side. |
| Neck & closure | |
| Neck finish | Ø32 mm screw neck — the 32/410 industry standard, one of the most widely stocked closure sizes worldwide. |
| Dispensing options | high-output lotion pump or wide flip-top cap. |
| Dosing note | At 650 ml the Ø32 mm neck is the standard pairing and is normally run with a high-output pump or a wide-mouth fill opening. Tell us the dose you need per application (ml per stroke) and we match the pump or sprayer output to it. |
Nearest PE / HDPE formats to this 650 ml model (600 ml, 600 ml, 680 ml, 700 ml), so you can compare a capacity step up or down without leaving the family. Every row is a stocked SKU with its own page and drawings.
| SKU | Capacity | Weight | Neck | Height | Difference |
| SJE1655-700 | 700 ml | 61 g | Ø50 mm | 211 mm | +50 ml larger |
| SJE1642-680 | 680 ml | 57 g | Ø32 mm | 209 mm | +30 ml larger · same neck |
| SJE0142-650 | 650 ml | 55 g | Ø32 mm | 216 mm | This model |
| SJE1871-600 | 600 ml | 58 g | Ø32 mm | 169 mm | 50 ml smaller · same neck |
| SJE1861-600 | 600 ml | 66 g | Ø32 mm | 176 mm | 50 ml smaller · same neck |
Tell us your quantity and target market — our engineering team replies within 2 working hours with pricing, lead time and samples. No registration required.
