PE Cosmetic Bottle 240ml
Download the complete PE / HDPE bottle catalog PDF.
Full engineering parameters for SJE0149-240. Nominal factory values — custom colors, printing and finishing available on all parameters below.
| Dimensions & Capacity | |
| Nominal Capacity | 240 ml (8.1 fl oz) |
| Overflow Capacity (brimful) | 250 ml (8.5 fl oz) |
| Bottle Weight | 25 g |
| Neck Finish | 24 mm |
| Total Height | 170 mm |
| Shoulder Height | 155 mm |
| Base (W × D) | 48 × 48 mm |
| Material & Compliance | |
| Material | PE/HDPE |
| Resin Grade | Food-contact, virgin (non-recycled) |
| Certifications | ISO 9001 / FDA / SGS |
| Recyclable | Yes |
| Packing & Order Info | |
| Carton Pack | Confirmed per order — contact us for exact carton specs |
| MOQ | 5,000 units |
| Lead Time | 15–25 days |
Typical applications for this mid-size HDPE bottle: shampoo, conditioner, body wash, hand soap and general personal-care packaging. HDPE resists everyday chemicals and squeezes cleanly to the last drop.
SJE0149-240 is a 240 ml PE / HDPE bottle in the mid-format skincare range. It suits sunscreen, opaque lotions, body wash and chemical-sensitive formulations, and is commonly specified for face creams, lotions, cleansers and mid-size skincare. The 24 mm neck is compatible with a 24/410 lotion pump, sprayer or flip-top cap, so it adapts to pump, spray or screw formats without mold changes.
For branding, silk-screen, hot-stamp and in-mold labeling are available on this PE / HDPE body. Pair it with a matching a 24/410 lotion pump, sprayer or flip-top cap to complete a shelf-ready package at a 5,000 units MOQ, produced on ISO 9001 / FDA / SGS certified lines.
Everything below is calculated from the nominal dimensions in the specification table above (PE / HDPE, 240 ml ≈ 8.1 fl oz, Ø24 mm neck). These figures are engineering guidance for label sizing, closure matching and freight planning — they are not a separate product specification, and final tolerances are confirmed on your approved sample.
| Body geometry | |
| Body shape | Round body — 48 mm diameter across the base, 170 mm tall overall. A round format prints and labels evenly from any angle and reads as a premium cosmetic silhouette. |
| Height to width | 3.54 : 1 (170 mm tall, 48 mm wide). Tall profile: the height carries shelf presence while the carton footprint per unit stays small. |
| Fill-to-outline ratio | 240 ml stated capacity inside a 392 ml rectangular outline — 61 %. Typical wall and shoulder allowance for an injection- or extrusion-blown bottle of this size. Fill line is normally set at 90–95 % of stated capacity. |
| Unit weight | 25 g body weight = 10.4 g per 100 ml. Mid-weight range: the balance most buyers settle on between hand-feel and freight cost. |
| Label & decoration zone | |
| Usable label height | Up to 150 mm — from the base to the 155 mm shoulder line, less a 5 mm base transition. Taller artwork runs onto the shoulder with a curved-label option. |
| Body circumference | 151 mm (π × 48 mm) — a wrap-around label up to 139 mm wide fits with seam clearance. |
| Recommended maximum label size | ≈ 139 × 150 mm (W × H) wrap label, or a two-panel front/back set on the same circumference. |
| Neck & closure | |
| Neck finish | Ø24 mm screw neck — the 24/410 industry standard, one of the most widely stocked closure sizes worldwide. |
| Dispensing options | lotion pump, fine-mist sprayer, flip-top cap, disc-top cap or screw cap. |
| Dosing note | At 240 ml the Ø24 mm neck is the standard pairing and is normally run with a single- or double-dose pump. Tell us the dose you need per application (ml per stroke) and we match the pump or sprayer output to it. |
Nearest PE / HDPE formats to this 240 ml model (235 ml, 230 ml, 245 ml, 246 ml), so you can compare a capacity step up or down without leaving the family. Every row is a stocked SKU with its own page and drawings.
| SKU | Capacity | Weight | Neck | Height | Difference |
| SJE1851-246 | 246 ml | 27 g | Ø24 mm | 185 mm | +6 ml larger · same neck |
| SJE1729-245 | 245 ml | 26 g | Ø28 mm | 176 mm | +5 ml larger |
| SJE0149-240 | 240 ml | 25 g | Ø24 mm | 170 mm | This model |
| SJE0013-235 | 235 ml | 23 g | Ø28 mm | 180 mm | 5 ml smaller |
| SJE1885-230 | 230 ml | 34 g | Ø24 mm | 124 mm | 10 ml smaller · same neck |
Tell us your quantity and target market — our engineering team replies within 2 working hours with pricing, lead time and samples. No registration required.
