PE Cosmetic Bottle 1800ml
Download the complete PE / HDPE bottle catalog PDF.
Full engineering parameters for SJE1886-1800. Nominal factory values — custom colors, printing and finishing available on all parameters below.
| Dimensions & Capacity | |
| Nominal Capacity | 1800 ml (60.9 fl oz) |
| Bottle Weight | 110 g |
| Neck Finish | 32 mm |
| Total Height | 265 mm |
| Shoulder Height | 248 mm |
| Base (W × D) | 132 × 91 mm |
| Material & Compliance | |
| Material | PE/HDPE |
| Resin Grade | Food-contact, virgin (non-recycled) |
| Certifications | ISO 9001 / FDA / SGS |
| Recyclable | Yes |
| Packing & Order Info | |
| Carton Pack | Confirmed per order — contact us for exact carton specs |
| MOQ | 5,000 units |
| Lead Time | 15–25 days |
Typical applications for this large HDPE bottle: fabric softener, laundry detergent, household cleaners and high-volume refills. HDPE's chemical resistance and durability make it the standard for household-care packaging.
SJE1886-1800 is a 1800 ml PE / HDPE bottle in the bulk & professional size range. It suits sunscreen, opaque lotions, body wash and chemical-sensitive formulations, and is commonly specified for bulk refill, salon and professional back-bar use. The 32 mm neck is compatible with standard screw, pump or flip-top closure, so it adapts to pump, spray or screw formats without mold changes.
For branding, silk-screen, hot-stamp and in-mold labeling are available on this PE / HDPE body. Pair it with a matching standard screw, pump or flip-top closure to complete a shelf-ready package at a 5,000 units MOQ, produced on ISO 9001 / FDA / SGS certified lines.
Everything below is calculated from the nominal dimensions in the specification table above (PE / HDPE, 1,800 ml ≈ 60.9 fl oz, Ø32 mm neck). These figures are engineering guidance for label sizing, closure matching and freight planning — they are not a separate product specification, and final tolerances are confirmed on your approved sample.
| Body geometry | |
| Body shape | Flat-oval body — 132 × 91 mm base (1.45 : 1 width-to-depth). Two parallel 132 mm faces carry front and back artwork, while the narrow 91 mm sides suit barcode, batch or ingredient panels. |
| Height to width | 2.01 : 1 (265 mm tall, 132 mm wide). Mid-height format: stable on standard filling and labelling lines without rail changes. |
| Fill-to-outline ratio | 1,800 ml stated capacity inside a 3,183 ml rectangular outline — 57 %. Typical wall and shoulder allowance for an injection- or extrusion-blown bottle of this size. Fill line is normally set at 90–95 % of stated capacity. |
| Unit weight | 110 g body weight = 6.1 g per 100 ml. Lightweight range: lower resin cost per unit and cheaper freight at equal carton count. |
| Label & decoration zone | |
| Usable label height | Up to 243 mm — from the base to the 248 mm shoulder line, less a 5 mm base transition. Taller artwork runs onto the shoulder with a curved-label option. |
| Front panel width | 132 mm flat face → artwork up to 124 mm wide with a 4 mm safety margin each side. |
| Recommended maximum label size | ≈ 124 × 243 mm (W × H) flat label on each face, or a wrap label over the 91 mm sides for tamper evidence. |
| Neck & closure | |
| Neck finish | Ø32 mm screw neck — the 32/410 industry standard, one of the most widely stocked closure sizes worldwide. |
| Dispensing options | high-output lotion pump or wide flip-top cap. |
| Dosing note | At 1,800 ml the Ø32 mm neck is the standard pairing and is normally run with a high-output pump or a wide-mouth fill opening. Tell us the dose you need per application (ml per stroke) and we match the pump or sprayer output to it. |
Nearest PE / HDPE formats to this 1,800 ml model (1,500 ml, 1,300 ml, 2,000 ml), so you can compare a capacity step up or down without leaving the family. Every row is a stocked SKU with its own page and drawings.
| SKU | Capacity | Weight | Neck | Height | Difference |
| SJE1658-2000 | 2,000 ml | 127 g | Ø32 mm | 258 mm | +200 ml larger · same neck |
| SJE1886-1800 | 1,800 ml | 110 g | Ø32 mm | 265 mm | This model |
| SJE1695-1500 | 1,500 ml | 90 g | Ø32 mm | 290 mm | 300 ml smaller · same neck |
| SJE0134-1300 | 1,300 ml | 97 g | Ø32 mm | 210 mm | 500 ml smaller · same neck |
Tell us your quantity and target market — our engineering team replies within 2 working hours with pricing, lead time and samples. No registration required.
