PE Cosmetic Bottle 85ml
Download the complete PE / HDPE bottle catalog PDF.
Full engineering parameters for SJE1902-85. Nominal factory values — custom colors, printing and finishing available on all parameters below.
| Dimensions & Capacity | |
| Nominal Capacity | 85 ml (2.9 fl oz) |
| Overflow Capacity (brimful) | 90 ml (3.0 fl oz) |
| Bottle Weight | 21 g |
| Neck Finish | 23/410 |
| Total Height | 96 mm |
| Shoulder Height | 85 mm |
| Base (W × D) | 42 × 42 mm |
| Material & Compliance | |
| Material | PE/HDPE |
| Resin Grade | Food-contact, virgin (non-recycled) |
| Certifications | ISO 9001 / FDA / SGS |
| Recyclable | Yes |
| Packing & Order Info | |
| Carton Pack | Confirmed per order — contact us for exact carton specs |
| MOQ | 5,000 units |
| Lead Time | 15–25 days |
Typical applications for this small HDPE bottle: travel-size shampoo and conditioner, hand wash, lotion and personal-care samples. Squeezable HDPE is lightweight and drop-safe for travel and retail.
SJE1902-85 is a 85 ml PE / HDPE bottle in the travel & trial size range. It suits sunscreen, opaque lotions, body wash and chemical-sensitive formulations, and is commonly specified for travel-size toiletry, trial kits, hotel amenities and promotional samples. The 23 mm neck is compatible with standard screw, pump or flip-top closure, so it adapts to pump, spray or screw formats without mol so it adapts to pump, spray or screw formats without mold changes.
For branding, silk-screen, hot-stamp and in-mold labeling are available on this PE / HDPE body. Pair it with a matching standard screw, pump or flip-top closure to complete a shelf-ready package at a 5,000 units MOQ, produced on ISO 9001 / FDA / SGS certified lines.
Everything below is calculated from the nominal dimensions in the specification table above (PE / HDPE, 85 ml ≈ 2.9 fl oz, Ø23 mm neck). These figures are engineering guidance for label sizing, closure matching and freight planning — they are not a separate product specification, and final tolerances are confirmed on your approved sample.
| Body geometry | |
| Body shape | Round body — 42 mm diameter across the base, 96 mm tall overall. A round format prints and labels evenly from any angle and reads as a premium cosmetic silhouette. |
| Height to width | 2.29 : 1 (96 mm tall, 42 mm wide). Mid-height format: stable on standard filling and labelling lines without rail changes. |
| Fill-to-outline ratio | 85 ml stated capacity inside a 169 ml rectangular outline — 50 %. Typical wall and shoulder allowance for an injection- or extrusion-blown bottle of this size. Fill line is normally set at 90–95 % of stated capacity. |
| Unit weight | 21 g body weight = 24.7 g per 100 ml. Heavy-wall range: chosen when the bottle must feel substantial or survive repeated squeezing. |
| Label & decoration zone | |
| Usable label height | Up to 80 mm — from the base to the 85 mm shoulder line, less a 5 mm base transition. Taller artwork runs onto the shoulder with a curved-label option. |
| Body circumference | 132 mm (π × 42 mm) — a wrap-around label up to 121 mm wide fits with seam clearance. |
| Recommended maximum label size | ≈ 121 × 80 mm (W × H) wrap label, or a two-panel front/back set on the same circumference. |
| Neck & closure | |
| Neck finish | Ø23 mm screw neck — quote the closure together with the bottle so the T-dimension is confirmed on the drawing. |
| Dosing note | At 85 ml the Ø23 mm neck is the standard pairing and is normally run with a single- or double-dose pump. Tell us the dose you need per application (ml per stroke) and we match the pump or sprayer output to it. |
Nearest PE / HDPE formats to this 85 ml model (80 ml, 80 ml, 90 ml, 90 ml), so you can compare a capacity step up or down without leaving the family. Every row is a stocked SKU with its own page and drawings.
| SKU | Capacity | Weight | Neck | Height | Difference |
| SJE1718-90 | 90 ml | 16 g | Ø20 mm | 106 mm | +5 ml larger |
| SJE1731-90 | 90 ml | 17 g | Ø24 mm | 115 mm | +5 ml larger |
| SJE1902-85 | 85 ml | 21 g | Ø23 mm | 96 mm | This model |
| SJE1882-80 | 80 ml | 14 g | Ø20 mm | 113 mm | 5 ml smaller |
| SJE1830-80 | 80 ml | 10 g | Ø24 mm | 90 mm | 5 ml smaller |
Tell us your quantity and target market — our engineering team replies within 2 working hours with pricing, lead time and samples. No registration required.
