PET Cosmetic Bottle 600ml
Download the complete PET bottle catalog PDF for offline viewing.
Full engineering parameters for SJT0016-600. Nominal factory values — custom colors, printing and finishing available on all parameters below.
| Dimensions & Capacity | |
| Nominal Capacity | 600 ml (20.3 fl oz) |
| Overflow Capacity (brimful) | 636 ml (21.5 fl oz) |
| Bottle Weight | 47 g |
| Neck Finish | 28/410 |
| Total Height | 202 mm |
| Shoulder Height | 185 mm |
| Base (W × D) | 75 × 66 mm |
| Material & Compliance | |
| Material | PET |
| Resin Grade | Food-contact, virgin (non-recycled) |
| Certifications | ISO 9001 / FDA / SGS |
| Recyclable | Yes |
| Packing & Order Info | |
| Carton Pack | Confirmed per order — contact us for exact carton specs |
| MOQ | 5,000 units |
| Lead Time | 15–25 days |
Typical applications for this large PET bottle: refillable body wash, shampoo, conditioner and household-care volumes. Large formats cut per-unit packaging cost while keeping a clean, premium look.
SJT0016-600 is a 600 ml PET bottle in the family & refill size range. It suits clear toners, facial mists, shampoos and lightweight daily-care bottles, and is commonly specified for family-size body care, refill packs and value bundles. The 28 mm neck is compatible with a 28/410 lotion pump, trigger or screw cap, so so it adapts to pump, spray or screw formats without mold changes.
For branding, UV printing, hot-stamp and shrink sleeve are available on this PET body. Pair it with a matching a 28/410 lotion pump, trigger or screw cap to complete a shelf-ready package at a 5,000 units MOQ, produced on ISO 9001 / FDA / SGS certified lines.
Everything below is calculated from the nominal dimensions in the specification table above (PET, 600 ml ≈ 20.3 fl oz, Ø28 mm neck). These figures are engineering guidance for label sizing, closure matching and freight planning — they are not a separate product specification, and final tolerances are confirmed on your approved sample.
| Body geometry | |
| Body shape | Oval body — 75 × 66 mm base (1.14 : 1 width-to-depth). A softer cross-section that sits comfortably in the hand; artwork can run as a wrap or as two facing panels. |
| Height to width | 2.69 : 1 (202 mm tall, 75 mm wide). Tall profile: the height carries shelf presence while the carton footprint per unit stays small. |
| Fill-to-outline ratio | 600 ml stated capacity inside a 1,000 ml rectangular outline — 60 %. Typical wall and shoulder allowance for an injection- or extrusion-blown bottle of this size. Fill line is normally set at 90–95 % of stated capacity. |
| Unit weight | 47 g body weight = 7.8 g per 100 ml. Lightweight range: lower resin cost per unit and cheaper freight at equal carton count. |
| Label & decoration zone | |
| Usable label height | Up to 180 mm — from the base to the 185 mm shoulder line, less a 5 mm base transition. Taller artwork runs onto the shoulder with a curved-label option. |
| Front panel width | 75 mm flat face → artwork up to 67 mm wide with a 4 mm safety margin each side. |
| Recommended maximum label size | ≈ 67 × 180 mm (W × H) flat label on each face, or a wrap label over the 66 mm sides for tamper evidence. |
| Neck & closure | |
| Neck finish | Ø28 mm screw neck — the 28/410 industry standard, one of the most widely stocked closure sizes worldwide. |
| Dispensing options | lotion pump, flip-top cap, disc-top cap or screw cap. |
| Dosing note | At 600 ml the Ø28 mm neck is the standard pairing and is normally run with a high-output pump or a wide-mouth fill opening. Tell us the dose you need per application (ml per stroke) and we match the pump or sprayer output to it. |
Nearest PET formats to this 600 ml model (580 ml, 580 ml, 640 ml, 650 ml), so you can compare a capacity step up or down without leaving the family. Every row is a stocked SKU with its own page and drawings.
| SKU | Capacity | Weight | Neck | Height | Difference |
| SJT0189-650 | 650 ml | 55 g | Ø32 mm | 216 mm | +50 ml larger |
| SJT0300-640 | 640 ml | 45 g | Ø24 mm | 245 mm | +40 ml larger |
| SJT0016-600 | 600 ml | 47 g | Ø28 mm | 202 mm | This model |
| SJT0470-580 | 580 ml | 47 g | Ø32 mm | 215 mm | 20 ml smaller |
| SJT0432-580 | 580 ml | 47 g | Ø32 mm | 206 mm | 20 ml smaller |
Tell us your quantity and target market — our engineering team replies within 2 working hours with pricing, lead time and samples. No registration required.
