PET Cosmetic Bottle 210ml
Download the complete PET bottle catalog PDF for offline viewing.
Full engineering parameters for SJT0150-210. Nominal factory values — custom colors, printing and finishing available on all parameters below.
| Dimensions & Capacity | |
| Nominal Capacity | 210 ml (7.1 fl oz) |
| Overflow Capacity (brimful) | 223 ml (7.5 fl oz) |
| Bottle Weight | 25 g |
| Neck Finish | 24/410 |
| Total Height | 195 mm |
| Shoulder Height | 179 mm |
| Base (W × D) | 55 × 37 mm |
| Material & Compliance | |
| Material | PET |
| Resin Grade | Food-contact, virgin (non-recycled) |
| Certifications | ISO 9001 / FDA / SGS |
| Recyclable | Yes |
| Packing & Order Info | |
| Carton Pack | Confirmed per order — contact us for exact carton specs |
| MOQ | 5,000 units |
| Lead Time | 15–25 days |
Typical applications for this mid-size PET bottle: body lotion, hand wash, facial mist, shampoo and daily skincare. Its clarity and light weight suit retail shelves, while the neck accepts lotion pumps, sprayers or flip-top closures.
SJT0150-210 is a 210 ml PET bottle in the mid-format skincare range. It suits clear toners, facial mists, shampoos and lightweight daily-care bottles, and is commonly specified for face creams, lotions, cleansers and mid-size skincare. The 24 mm neck is compatible with a 24/410 lotion pump, sprayer or flip-top cap, so it adapts to pump, spray or screw formats without mold changes.
For branding, UV printing, hot-stamp and shrink sleeve are available on this PET body. Pair it with a matching a 24/410 lotion pump, sprayer or flip-top cap to complete a shelf-ready package at a 5,000 units MOQ, produced on ISO 9001 / FDA / SGS certified lines.
Everything below is calculated from the nominal dimensions in the specification table above (PET, 210 ml ≈ 7.1 fl oz, Ø24 mm neck). These figures are engineering guidance for label sizing, closure matching and freight planning — they are not a separate product specification, and final tolerances are confirmed on your approved sample.
| Body geometry | |
| Body shape | Flat-oval body — 55 × 37 mm base (1.49 : 1 width-to-depth). Two parallel 55 mm faces carry front and back artwork, while the narrow 37 mm sides suit barcode, batch or ingredient panels. |
| Height to width | 3.55 : 1 (195 mm tall, 55 mm wide). Tall profile: the height carries shelf presence while the carton footprint per unit stays small. |
| Fill-to-outline ratio | 210 ml stated capacity inside a 397 ml rectangular outline — 53 %. Typical wall and shoulder allowance for an injection- or extrusion-blown bottle of this size. Fill line is normally set at 90–95 % of stated capacity. |
| Unit weight | 25 g body weight = 11.9 g per 100 ml. Mid-weight range: the balance most buyers settle on between hand-feel and freight cost. |
| Label & decoration zone | |
| Usable label height | Up to 174 mm — from the base to the 179 mm shoulder line, less a 5 mm base transition. Taller artwork runs onto the shoulder with a curved-label option. |
| Front panel width | 55 mm flat face → artwork up to 47 mm wide with a 4 mm safety margin each side. |
| Recommended maximum label size | ≈ 47 × 174 mm (W × H) flat label on each face, or a wrap label over the 37 mm sides for tamper evidence. |
| Neck & closure | |
| Neck finish | Ø24 mm screw neck — the 24/410 industry standard, one of the most widely stocked closure sizes worldwide. |
| Dispensing options | lotion pump, fine-mist sprayer, flip-top cap, disc-top cap or screw cap. |
| Dosing note | At 210 ml the Ø24 mm neck is the standard pairing and is normally run with a single- or double-dose pump. Tell us the dose you need per application (ml per stroke) and we match the pump or sprayer output to it. |
Nearest PET formats to this 210 ml model (200 ml, 200 ml, 220 ml, 220 ml), so you can compare a capacity step up or down without leaving the family. Every row is a stocked SKU with its own page and drawings.
| SKU | Capacity | Weight | Neck | Height | Difference |
| SJT0234-220 | 220 ml | 19 g | Ø24 mm | 133 mm | +10 ml larger · same neck |
| SJT0361-220 | 220 ml | 30 g | Ø24 mm | 175 mm | +10 ml larger · same neck |
| SJT0150-210 | 210 ml | 25 g | Ø24 mm | 195 mm | This model |
| SJT0564-200 | 200 ml | 23 g | Ø20 mm | 153 mm | 10 ml smaller |
| SJT0560-200 | 200 ml | 25 g | Ø24 mm | 146 mm | 10 ml smaller · same neck |
Tell us your quantity and target market — our engineering team replies within 2 working hours with pricing, lead time and samples. No registration required.
