PET Cosmetic Bottle 1200ml
Download the complete PET bottle catalog PDF for offline viewing.
Full engineering parameters for SJT0160-1200. Nominal factory values — custom colors, printing and finishing available on all parameters below.
| Dimensions & Capacity | |
| Nominal Capacity | 1200 ml (40.6 fl oz) |
| Overflow Capacity (brimful) | 1239 ml (41.9 fl oz) |
| Bottle Weight | 65 g |
| Neck Finish | 32/410 |
| Total Height | 233 mm |
| Shoulder Height | 218 mm |
| Base (W × D) | 92 × 92 mm |
| Material & Compliance | |
| Material | PET |
| Resin Grade | Food-contact, virgin (non-recycled) |
| Certifications | ISO 9001 / FDA / SGS |
| Recyclable | Yes |
| Packing & Order Info | |
| Carton Pack | 80 pcs / carton |
| Carton Dimensions (L×W×H) | 76 × 50 × 48 cm |
| MOQ | 5,000 units |
| Lead Time | 15–25 days |
Typical applications for this large PET bottle: refillable body wash, shampoo, conditioner and household-care volumes. Large formats cut per-unit packaging cost while keeping a clean, premium look.
SJT0160-1200 is a 1200 ml PET bottle in the bulk & professional size range. It suits clear toners, facial mists, shampoos and lightweight daily-care bottles, and is commonly specified for bulk refill, salon and professional back-bar use. The 32 mm neck is compatible with standard screw, pump or flip-top closure, s so it adapts to pump, spray or screw formats without mold changes.
For branding, UV printing, hot-stamp and shrink sleeve are available on this PET body. Pair it with a matching standard screw, pump or flip-top closure to complete a shelf-ready package at a 5,000 units MOQ, produced on ISO 9001 / FDA / SGS certified lines.
Everything below is calculated from the nominal dimensions in the specification table above (PET, 1,200 ml ≈ 40.6 fl oz, Ø32 mm neck). These figures are engineering guidance for label sizing, closure matching and freight planning — they are not a separate product specification, and final tolerances are confirmed on your approved sample.
| Body geometry | |
| Body shape | Round body — 92 mm diameter across the base, 233 mm tall overall. A round format prints and labels evenly from any angle and reads as a premium cosmetic silhouette. |
| Height to width | 2.53 : 1 (233 mm tall, 92 mm wide). Tall profile: the height carries shelf presence while the carton footprint per unit stays small. |
| Fill-to-outline ratio | 1,200 ml stated capacity inside a 1,972 ml rectangular outline — 61 %. Typical wall and shoulder allowance for an injection- or extrusion-blown bottle of this size. Fill line is normally set at 90–95 % of stated capacity. |
| Unit weight | 65 g body weight = 5.4 g per 100 ml. Lightweight range: lower resin cost per unit and cheaper freight at equal carton count. |
| Label & decoration zone | |
| Usable label height | Up to 213 mm — from the base to the 218 mm shoulder line, less a 5 mm base transition. Taller artwork runs onto the shoulder with a curved-label option. |
| Body circumference | 289 mm (π × 92 mm) — a wrap-around label up to 266 mm wide fits with seam clearance. |
| Recommended maximum label size | ≈ 266 × 213 mm (W × H) wrap label, or a two-panel front/back set on the same circumference. |
| Neck & closure | |
| Neck finish | Ø32 mm screw neck — the 32/410 industry standard, one of the most widely stocked closure sizes worldwide. |
| Dispensing options | high-output lotion pump or wide flip-top cap. |
| Dosing note | At 1,200 ml the Ø32 mm neck is the standard pairing and is normally run with a high-output pump or a wide-mouth fill opening. Tell us the dose you need per application (ml per stroke) and we match the pump or sprayer output to it. |
Nearest PET formats to this 1,200 ml model (1,000 ml, 1,000 ml, 1,300 ml, 1,500 ml), so you can compare a capacity step up or down without leaving the family. Every row is a stocked SKU with its own page and drawings.
| SKU | Capacity | Weight | Neck | Height | Difference |
| SJT0382-1500 | 1,500 ml | 90 g | Ø32 mm | 233 mm | +300 ml larger · same neck |
| SJT0085-1300 | 1,300 ml | 65 g | Ø32 mm | 216 mm | +100 ml larger · same neck |
| SJT0160-1200 | 1,200 ml | 65 g | Ø32 mm | 233 mm | This model |
| SJT0528-1000 | 1,000 ml | 65 g | Ø32 mm | 208 mm | 200 ml smaller · same neck |
| SJT0481-1000 | 1,000 ml | 55 g | Ø28 mm | 214 mm | 200 ml smaller |
Tell us your quantity and target market — our engineering team replies within 2 working hours with pricing, lead time and samples. No registration required.
