PET Cosmetic Bottle 2000ml
Download the complete PET bottle catalog PDF for offline viewing.
Full engineering parameters for SJT0161-2000. Nominal factory values — custom colors, printing and finishing available on all parameters below.
| Dimensions & Capacity | |
| Nominal Capacity | 2000 ml (67.6 fl oz) |
| Bottle Weight | 90 g |
| Neck Finish | 32/410 |
| Total Height | 260 mm |
| Shoulder Height | 246 mm |
| Base (W × D) | 113 × 113 mm |
| Material & Compliance | |
| Material | PET |
| Resin Grade | Food-contact, virgin (non-recycled) |
| Certifications | ISO 9001 / FDA / SGS |
| Recyclable | Yes |
| Packing & Order Info | |
| Carton Pack | Confirmed per order — contact us for exact carton specs |
| MOQ | 5,000 units |
| Lead Time | 15–25 days |
Typical applications for this large PET bottle: refillable body wash, shampoo, conditioner and household-care volumes. Large formats cut per-unit packaging cost while keeping a clean, premium look.
SJT0161-2000 is a 2000 ml PET bottle in the bulk & professional size range. It suits clear toners, facial mists, shampoos and lightweight daily-care bottles, and is commonly specified for bulk refill, salon and professional back-bar use. The 32 mm neck is compatible with standard screw, pump or flip-top closure, s so it adapts to pump, spray or screw formats without mold changes.
For branding, UV printing, hot-stamp and shrink sleeve are available on this PET body. Pair it with a matching standard screw, pump or flip-top closure to complete a shelf-ready package at a 5,000 units MOQ, produced on ISO 9001 / FDA / SGS certified lines.
Everything below is calculated from the nominal dimensions in the specification table above (PET, 2,000 ml ≈ 67.6 fl oz, Ø32 mm neck). These figures are engineering guidance for label sizing, closure matching and freight planning — they are not a separate product specification, and final tolerances are confirmed on your approved sample.
| Body geometry | |
| Body shape | Round body — 113 mm diameter across the base, 260 mm tall overall. A round format prints and labels evenly from any angle and reads as a premium cosmetic silhouette. |
| Height to width | 2.30 : 1 (260 mm tall, 113 mm wide). Mid-height format: stable on standard filling and labelling lines without rail changes. |
| Fill-to-outline ratio | 2,000 ml stated capacity inside a 3,320 ml rectangular outline — 60 %. Typical wall and shoulder allowance for an injection- or extrusion-blown bottle of this size. Fill line is normally set at 90–95 % of stated capacity. |
| Label & decoration zone | |
| Usable label height | Up to 241 mm — from the base to the 246 mm shoulder line, less a 5 mm base transition. Taller artwork runs onto the shoulder with a curved-label option. |
| Body circumference | 355 mm (π × 113 mm) — a wrap-around label up to 327 mm wide fits with seam clearance. |
| Recommended maximum label size | ≈ 327 × 241 mm (W × H) wrap label, or a two-panel front/back set on the same circumference. |
| Neck & closure | |
| Neck finish | Ø32 mm screw neck — the 32/410 industry standard, one of the most widely stocked closure sizes worldwide. |
| Dispensing options | high-output lotion pump or wide flip-top cap. |
| Dosing note | At 2,000 ml the Ø32 mm neck is the standard pairing and is normally run with a high-output pump or a wide-mouth fill opening. Tell us the dose you need per application (ml per stroke) and we match the pump or sprayer output to it. |
Nearest PET formats to this 2,000 ml model (1,800 ml, 1,800 ml, 2,008 ml), so you can compare a capacity step up or down without leaving the family. Every row is a stocked SKU with its own page and drawings.
| SKU | Capacity | Weight | Neck | Height | Difference |
| SJT0185-2008 | 2,008 ml | 90 g | Ø32 mm | 254 mm | +8 ml larger · same neck |
| SJT0161-2000 | 2,000 ml | 90 g | Ø32 mm | 260 mm | This model |
| SJT0175-1800 | 1,800 ml | 75 g | Ø32 mm | 255 mm | 200 ml smaller · same neck |
| SJT0105-1800 | 1,800 ml | 90 g | Ø32 mm | 291 mm | 200 ml smaller · same neck |
Tell us your quantity and target market — our engineering team replies within 2 working hours with pricing, lead time and samples. No registration required.
