PET Cosmetic Bottle 110ml
Download the complete PET bottle catalog PDF for offline viewing.
Full engineering parameters for SJT0257-110. Nominal factory values — custom colors, printing and finishing available on all parameters below.
| Dimensions & Capacity | |
| Nominal Capacity | 110 ml (3.7 fl oz) |
| Overflow Capacity (brimful) | 129 ml (4.4 fl oz) |
| Bottle Weight | 25 g |
| Neck Finish | 24/410 |
| Total Height | 126 mm |
| Shoulder Height | 109 mm |
| Base (W × D) | 47 × 30 mm |
| Material & Compliance | |
| Material | PET |
| Resin Grade | Food-contact, virgin (non-recycled) |
| Certifications | ISO 9001 / FDA / SGS |
| Recyclable | Yes |
| Packing & Order Info | |
| Carton Pack | 720 pcs / carton |
| Carton Dimensions (L×W×H) | 76 × 50 × 42 cm |
| MOQ | 5,000 units |
| Lead Time | 15–25 days |
Typical applications for this small PET bottle: serums, facial toners, essential-oil blends, hand-sanitizer and travel-size skincare. The clear PET wall shows formula color, and the standard neck pairs with fine-mist sprayers, dropper or screw caps.
SJT0257-110 is a 110 ml PET bottle in the daily face-care size range. It suits clear toners, facial mists, shampoos and lightweight daily-care bottles, and is commonly specified for facial serums, essences, toners and daily moisturizers. The 24 mm neck is compatible with a 24/410 lotion pump, sprayer or flip-top cap, so it adapts t so it adapts to pump, spray or screw formats without mold changes.
For branding, UV printing, hot-stamp and shrink sleeve are available on this PET body. Pair it with a matching a 24/410 lotion pump, sprayer or flip-top cap to complete a shelf-ready package at a 5,000 units MOQ, produced on ISO 9001 / FDA / SGS certified lines.
Everything below is calculated from the nominal dimensions in the specification table above (PET, 110 ml ≈ 3.7 fl oz, Ø24 mm neck). These figures are engineering guidance for label sizing, closure matching and freight planning — they are not a separate product specification, and final tolerances are confirmed on your approved sample.
| Body geometry | |
| Body shape | Flat-oval body — 47 × 30 mm base (1.57 : 1 width-to-depth). Two parallel 47 mm faces carry front and back artwork, while the narrow 30 mm sides suit barcode, batch or ingredient panels. |
| Height to width | 2.68 : 1 (126 mm tall, 47 mm wide). Tall profile: the height carries shelf presence while the carton footprint per unit stays small. |
| Fill-to-outline ratio | 110 ml stated capacity inside a 178 ml rectangular outline — 62 %. Typical wall and shoulder allowance for an injection- or extrusion-blown bottle of this size. Fill line is normally set at 90–95 % of stated capacity. |
| Unit weight | 25 g body weight = 22.7 g per 100 ml. Heavy-wall range: chosen when the bottle must feel substantial or survive repeated squeezing. |
| Label & decoration zone | |
| Usable label height | Up to 104 mm — from the base to the 109 mm shoulder line, less a 5 mm base transition. Taller artwork runs onto the shoulder with a curved-label option. |
| Front panel width | 47 mm flat face → artwork up to 39 mm wide with a 4 mm safety margin each side. |
| Recommended maximum label size | ≈ 39 × 104 mm (W × H) flat label on each face, or a wrap label over the 30 mm sides for tamper evidence. |
| Neck & closure | |
| Neck finish | Ø24 mm screw neck — the 24/410 industry standard, one of the most widely stocked closure sizes worldwide. |
| Dispensing options | lotion pump, fine-mist sprayer, flip-top cap, disc-top cap or screw cap. |
| Dosing note | At 110 ml the Ø24 mm neck is the standard pairing and is normally run with a single- or double-dose pump. Tell us the dose you need per application (ml per stroke) and we match the pump or sprayer output to it. |
Nearest PET formats to this 110 ml model (100 ml, 100 ml, 118 ml, 120 ml), so you can compare a capacity step up or down without leaving the family. Every row is a stocked SKU with its own page and drawings.
| SKU | Capacity | Weight | Neck | Height | Difference |
| SJT0028-120 | 120 ml | 19 g | Ø24 mm | 138 mm | +10 ml larger · same neck |
| SJT0547-118 | 118 ml | 15 g | Ø20 mm | 126 mm | +8 ml larger |
| SJT0257-110 | 110 ml | 25 g | Ø24 mm | 126 mm | This model |
| SJT0586-100 | 100 ml | 11 g | Ø18 mm | 102 mm | 10 ml smaller |
| SJT0583-100 | 100 ml | 8 g | Ø20 mm | 88 mm | 10 ml smaller |
Tell us your quantity and target market — our engineering team replies within 2 working hours with pricing, lead time and samples. No registration required.
