PET Cosmetic Bottle 200ml
Download the complete PET bottle catalog PDF for offline viewing.
Full engineering parameters for SJT0278-200. Nominal factory values — custom colors, printing and finishing available on all parameters below.
| Dimensions & Capacity | |
| Nominal Capacity | 200 ml (6.8 fl oz) |
| Overflow Capacity (brimful) | 223 ml (7.5 fl oz) |
| Bottle Weight | 29 g |
| Neck Finish | 28/410 |
| Total Height | 165 mm |
| Shoulder Height | 149 mm |
| Base (W × D) | 59 × 35 mm |
| Material & Compliance | |
| Material | PET |
| Resin Grade | Food-contact, virgin (non-recycled) |
| Certifications | ISO 9001 / FDA / SGS |
| Recyclable | Yes |
| Packing & Order Info | |
| Carton Pack | 360 pcs / carton |
| Carton Dimensions (L×W×H) | 76 × 50 × 35 cm |
| MOQ | 5,000 units |
| Lead Time | 15–25 days |
Typical applications for this mid-size PET bottle: body lotion, hand wash, facial mist, shampoo and daily skincare. Its clarity and light weight suit retail shelves, while the neck accepts lotion pumps, sprayers or flip-top closures.
SJT0278-200 is a 200 ml PET bottle in the daily face-care size range. It suits clear toners, facial mists, shampoos and lightweight daily-care bottles, and is commonly specified for facial serums, essences, toners and daily moisturizers. The 28 mm neck is compatible with a 28/410 lotion pump, trigger or screw cap, so it adapts to pump, spray or screw formats wi so it adapts to pump, spray or screw formats without mold changes.
For branding, UV printing, hot-stamp and shrink sleeve are available on this PET body. Pair it with a matching a 28/410 lotion pump, trigger or screw cap to complete a shelf-ready package at a 5,000 units MOQ, produced on ISO 9001 / FDA / SGS certified lines.
Everything below is calculated from the nominal dimensions in the specification table above (PET, 200 ml ≈ 6.8 fl oz, Ø28 mm neck). These figures are engineering guidance for label sizing, closure matching and freight planning — they are not a separate product specification, and final tolerances are confirmed on your approved sample.
| Body geometry | |
| Body shape | Flat-oval body — 59 × 35 mm base (1.69 : 1 width-to-depth). Two parallel 59 mm faces carry front and back artwork, while the narrow 35 mm sides suit barcode, batch or ingredient panels. |
| Height to width | 2.80 : 1 (165 mm tall, 59 mm wide). Tall profile: the height carries shelf presence while the carton footprint per unit stays small. |
| Fill-to-outline ratio | 200 ml stated capacity inside a 341 ml rectangular outline — 59 %. Typical wall and shoulder allowance for an injection- or extrusion-blown bottle of this size. Fill line is normally set at 90–95 % of stated capacity. |
| Unit weight | 29 g body weight = 14.5 g per 100 ml. Heavy-wall range: chosen when the bottle must feel substantial or survive repeated squeezing. |
| Label & decoration zone | |
| Usable label height | Up to 144 mm — from the base to the 149 mm shoulder line, less a 5 mm base transition. Taller artwork runs onto the shoulder with a curved-label option. |
| Front panel width | 59 mm flat face → artwork up to 51 mm wide with a 4 mm safety margin each side. |
| Recommended maximum label size | ≈ 51 × 144 mm (W × H) flat label on each face, or a wrap label over the 35 mm sides for tamper evidence. |
| Neck & closure | |
| Neck finish | Ø28 mm screw neck — the 28/410 industry standard, one of the most widely stocked closure sizes worldwide. |
| Dispensing options | lotion pump, flip-top cap, disc-top cap or screw cap. |
| Dosing note | At 200 ml the Ø28 mm neck is the standard pairing and is normally run with a single- or double-dose pump. Tell us the dose you need per application (ml per stroke) and we match the pump or sprayer output to it. |
Nearest PET formats to this 200 ml model (195 ml, 190 ml, 210 ml, 220 ml), so you can compare a capacity step up or down without leaving the family. Every row is a stocked SKU with its own page and drawings.
| SKU | Capacity | Weight | Neck | Height | Difference |
| SJT0234-220 | 220 ml | 19 g | Ø24 mm | 133 mm | +20 ml larger |
| SJT0150-210 | 210 ml | 25 g | Ø24 mm | 195 mm | +10 ml larger |
| SJT0278-200 | 200 ml | 29 g | Ø28 mm | 165 mm | This model |
| SJT0011-195 | 195 ml | 25 g | Ø24 mm | 193 mm | 5 ml smaller |
| SJT0313-190 | 190 ml | 19 g | Ø24 mm | 108 mm | 10 ml smaller |
Tell us your quantity and target market — our engineering team replies within 2 working hours with pricing, lead time and samples. No registration required.
