PET Cosmetic Bottle 250ml
Download the complete PET bottle catalog PDF for offline viewing.
Full engineering parameters for SJT0464-250. Nominal factory values — custom colors, printing and finishing available on all parameters below.
| Dimensions & Capacity | |
| Nominal Capacity | 250 ml (8.5 fl oz) |
| Overflow Capacity (brimful) | 290 ml (9.8 fl oz) |
| Bottle Weight | 30 g |
| Neck Finish | 24/410 |
| Total Height | 152 mm |
| Shoulder Height | 136 mm |
| Base (W × D) | 74 × 74 mm |
| Material & Compliance | |
| Material | PET |
| Resin Grade | Food-contact, virgin (non-recycled) |
| Certifications | ISO 9001 / FDA / SGS |
| Recyclable | Yes |
| Packing & Order Info | |
| Carton Pack | 180 pcs / carton |
| Carton Dimensions (L×W×H) | 76 × 50 × 48 cm |
| MOQ | 5,000 units |
| Lead Time | 15–25 days |
Typical applications for this mid-size PET bottle: body lotion, hand wash, facial mist, shampoo and daily skincare. Its clarity and light weight suit retail shelves, while the neck accepts lotion pumps, sprayers or flip-top closures.
SJT0464-250 is a 250 ml PET bottle in the mid-format skincare range. It suits clear toners, facial mists, shampoos and lightweight daily-care bottles, and is commonly specified for face creams, lotions, cleansers and mid-size skincare. The 24 mm neck is compatible with a 24/410 lotion pump, sprayer or flip-top cap, so it adapts to pump, spray or screw formats without mold changes.
For branding, UV printing, hot-stamp and shrink sleeve are available on this PET body. Pair it with a matching a 24/410 lotion pump, sprayer or flip-top cap to complete a shelf-ready package at a 5,000 units MOQ, produced on ISO 9001 / FDA / SGS certified lines.
SJT0464-250 is 152 mm tall on a 74 x 74 mm base, so the height is 2.05 times the widest base dimension and the footprint is 54.8 cm².
| Total height | 152 mm |
|---|---|
| Base (W x D) | 74 x 74 mm |
| Footprint | 54.8 cm² |
| Height to widest base | 2.05 : 1 |
| Average content per mm | 1.64 ml |
| Empty weight per 100 mm | 19.74 g |
| Empty weight per litre held | 120 g |
| Headspace above nominal | 40 ml (13.8%) |
SJT0048-250 is the closest thing we mould to SJT0464-250 at 250 ml: 2 mm shorter; the same 30 g empty. Moving between the two needs no new tooling.
| SKU | SJT0048-250 |
|---|---|
| Capacity | 250 ml (8.5 fl oz) |
| Height | 150 mm |
| Base | - |
| Neck | 24/410 |
| Weight | 30 g |
Stated capacity on SJT0464-250 is 250 ml and the brimful figure is 290 ml, so 40 ml of headspace sits under the rim, inside a body 152 mm tall. Holding the filler at a 90% line puts 225 ml in every unit, so a 500 L batch fills 2,222 of them.
| Batch of product | 250 ml units at 90% | Resin for those units |
|---|---|---|
| 500 L | 2,222 | 66.7 kg |
| 1,000 L | 4,444 | 133.3 kg |
| 5,000 L | 22,222 | 666.7 kg |
5,000 units of SJT0464-250 is 1,250 L of finished product, and 100,000 units is 25,000 L, which takes 3,000 kg of resin at 30 g a bottle. MOQ is per colour rather than per SKU. 152 mm and 250 ml formats can share one colour. Lead time is 15–30 days from sample sign-off and deposit.
Everything below is calculated from the nominal dimensions in the specification table above (PET, 250 ml ≈ 8.5 fl oz, Ø24 mm neck). These figures are engineering guidance for label sizing, closure matching and freight planning — they are not a separate product specification, and final tolerances are confirmed on your approved sample.
| Body geometry | |
| Body shape | Round body — 74 mm diameter across the base, 152 mm tall overall. A round format prints and labels evenly from any angle and reads as a premium cosmetic silhouette. |
| Height to width | 2.05 : 1 (152 mm tall, 74 mm wide). Mid-height format: stable on standard filling and labelling lines without rail changes. |
| Fill-to-outline ratio | 250 ml stated capacity inside a 832 ml rectangular outline — 30 %. Generous wall and shoulder clearance — a heavier, more premium feel in hand and more room for a deep shoulder radius. Fill line is normally set at 90–95 % of stated capacity. |
| Unit weight | 30 g body weight = 12.0 g per 100 ml. Mid-weight range: the balance most buyers settle on between hand-feel and freight cost. |
| Label & decoration zone | |
| Usable label height | Up to 131 mm — from the base to the 136 mm shoulder line, less a 5 mm base transition. Taller artwork runs onto the shoulder with a curved-label option. |
| Body circumference | 232 mm (π × 74 mm) — a wrap-around label up to 214 mm wide fits with seam clearance. |
| Recommended maximum label size | ≈ 214 × 131 mm (W × H) wrap label, or a two-panel front/back set on the same circumference. |
| Neck & closure | |
| Neck finish | Ø24 mm screw neck — the 24/410 industry standard, one of the most widely stocked closure sizes worldwide. |
| Dispensing options | lotion pump, fine-mist sprayer, flip-top cap, disc-top cap or screw cap. |
| Dosing note | At 250 ml the Ø24 mm neck is the standard pairing and is normally run with a single- or double-dose pump. Tell us the dose you need per application (ml per stroke) and we match the pump or sprayer output to it. |
Nearest PET formats to this 250 ml model (248 ml, 248 ml, 260 ml, 260 ml), so you can compare a capacity step up or down without leaving the family. Every row is a stocked SKU with its own page and drawings.
| SKU | Capacity | Weight | Neck | Height | Difference |
| SJT0001-260 | 260 ml | 25 g | Ø24 mm | 148 mm | +10 ml larger · same neck |
| SJT0031-260 | 260 ml | 30 g | Ø24 mm | 172 mm | +10 ml larger · same neck |
| SJT0464-250 | 250 ml | 30 g | Ø24 mm | 152 mm | This model |
| SJT0254-248 | 248 ml | 30 g | Ø24 mm | 150 mm | 2 ml smaller · same neck |
| SJT0129-248 | 248 ml | 25 g | Ø28 mm | 171 mm | 2 ml smaller |
Tell us your quantity and target market — our engineering team replies within 2 working hours with pricing, lead time and samples. No registration required.