PET Cosmetic Bottle 700ml
Download the complete PET bottle catalog PDF for offline viewing.
Full engineering parameters for SJT0480-700. Nominal factory values — custom colors, printing and finishing available on all parameters below.
| Dimensions & Capacity | |
| Nominal Capacity | 700 ml (23.7 fl oz) |
| Overflow Capacity (brimful) | 754 ml (25.5 fl oz) |
| Bottle Weight | 55 g |
| Neck Finish | 32/410 |
| Total Height | 200 mm |
| Shoulder Height | 187 mm |
| Base (W × D) | 76 × 76 mm |
| Material & Compliance | |
| Material | PET |
| Resin Grade | Food-contact, virgin (non-recycled) |
| Certifications | ISO 9001 / FDA / SGS |
| Recyclable | Yes |
| Packing & Order Info | |
| Carton Pack | 120 pcs / carton |
| Carton Dimensions (L×W×H) | 76 × 50 × 42 cm |
| MOQ | 5,000 units |
| Lead Time | 15–25 days |
Typical applications for this large PET bottle: refillable body wash, shampoo, conditioner and household-care volumes. Large formats cut per-unit packaging cost while keeping a clean, premium look.
SJT0480-700 is a 700 ml PET bottle in the family & refill size range. It suits clear toners, facial mists, shampoos and lightweight daily-care bottles, and is commonly specified for family-size body care, refill packs and value bundles. The 32 mm neck is compatible with standard screw, pump or flip-top closure, s so it adapts to pump, spray or screw formats without mold changes.
For branding, UV printing, hot-stamp and shrink sleeve are available on this PET body. Pair it with a matching standard screw, pump or flip-top closure to complete a shelf-ready package at a 5,000 units MOQ, produced on ISO 9001 / FDA / SGS certified lines.
SJT0480-700 is 200 mm tall on a 76 x 76 mm base, so the height is 2.63 times the widest base dimension and the footprint is 57.8 cm².
| Total height | 200 mm |
|---|---|
| Base (W x D) | 76 x 76 mm |
| Footprint | 57.8 cm² |
| Height to widest base | 2.63 : 1 |
| Average content per mm | 3.50 ml |
| Empty weight per 100 mm | 27.50 g |
| Empty weight per litre held | 78.6 g |
| Headspace above nominal | 54 ml (7.2%) |
SJE0021-700 is the closest thing we mould to SJT0480-700 at 700 ml: 1 mm taller. Moving between the two needs no new tooling.
| SKU | SJE0021-700 |
|---|---|
| Capacity | 700 ml (23.7 fl oz) |
| Height | 201 mm |
| Base | - |
| Neck | - |
| Weight | - |
Stated capacity on SJT0480-700 is 700 ml and the brimful figure is 754 ml, so 54 ml of headspace sits under the rim, inside a body 200 mm tall. Holding the filler at a 90% line puts 630 ml in every unit, so a 500 L batch fills 793 of them.
| Batch of product | 700 ml units at 90% | Resin for those units |
|---|---|---|
| 500 L | 793 | 43.6 kg |
| 1,000 L | 1,587 | 87.3 kg |
| 5,000 L | 7,936 | 436.5 kg |
5,000 units of SJT0480-700 is 3,500 L of finished product, and 100,000 units is 70,000 L, which takes 5,500 kg of resin at 55 g a bottle. MOQ is per colour rather than per SKU. 200 mm and 700 ml formats can share one colour. Lead time is 15–30 days from sample sign-off and deposit.
Everything below is calculated from the nominal dimensions in the specification table above (PET, 700 ml ≈ 23.7 fl oz, Ø32 mm neck). These figures are engineering guidance for label sizing, closure matching and freight planning — they are not a separate product specification, and final tolerances are confirmed on your approved sample.
| Body geometry | |
| Body shape | Round body — 76 mm diameter across the base, 200 mm tall overall. A round format prints and labels evenly from any angle and reads as a premium cosmetic silhouette. |
| Height to width | 2.63 : 1 (200 mm tall, 76 mm wide). Tall profile: the height carries shelf presence while the carton footprint per unit stays small. |
| Fill-to-outline ratio | 700 ml stated capacity inside a 1,155 ml rectangular outline — 61 %. Typical wall and shoulder allowance for an injection- or extrusion-blown bottle of this size. Fill line is normally set at 90–95 % of stated capacity. |
| Unit weight | 55 g body weight = 7.9 g per 100 ml. Lightweight range: lower resin cost per unit and cheaper freight at equal carton count. |
| Label & decoration zone | |
| Usable label height | Up to 182 mm — from the base to the 187 mm shoulder line, less a 5 mm base transition. Taller artwork runs onto the shoulder with a curved-label option. |
| Body circumference | 239 mm (π × 76 mm) — a wrap-around label up to 220 mm wide fits with seam clearance. |
| Recommended maximum label size | ≈ 220 × 182 mm (W × H) wrap label, or a two-panel front/back set on the same circumference. |
| Neck & closure | |
| Neck finish | Ø32 mm screw neck — the 32/410 industry standard, one of the most widely stocked closure sizes worldwide. |
| Dispensing options | high-output lotion pump or wide flip-top cap. |
| Dosing note | At 700 ml the Ø32 mm neck is the standard pairing and is normally run with a high-output pump or a wide-mouth fill opening. Tell us the dose you need per application (ml per stroke) and we match the pump or sprayer output to it. |
Nearest PET formats to this 700 ml model (680 ml, 680 ml, 738 ml, 750 ml), so you can compare a capacity step up or down without leaving the family. Every row is a stocked SKU with its own page and drawings.
| SKU | Capacity | Weight | Neck | Height | Difference |
| SJT0036-750 | 750 ml | 47 g | Ø32 mm | 204 mm | +50 ml larger · same neck |
| SJT0125-55 | 738 ml | 60 g | Ø32 mm | 229 mm | +38 ml larger · same neck |
| SJT0480-700 | 700 ml | 55 g | Ø32 mm | 200 mm | This model |
| SJT0552-680 | 680 ml | 60 g | Ø32 mm | 225 mm | 20 ml smaller · same neck |
| SJT0013-680 | 680 ml | 55 g | Ø32 mm | 210 mm | 20 ml smaller · same neck |
Tell us your quantity and target market — our engineering team replies within 2 working hours with pricing, lead time and samples. No registration required.