Home › Products › SJT0521-20

SJT0521-20

PET Cosmetic Bottle 20ml

SJT0521-20

PET Cosmetic Bottle 20ml
PET 20 ml
PET (Polyethylene Terephthalate) cosmetic bottle, nominal capacity 20 ml. Lightweight, crystal-clear and fully recyclable - a natural fit for travel-size and sample formats - ideal for serums, essences and concentrates. Food-contact safe (BPA-free) and recyclable, produced under ISO 9001 / FDA / SGS certified lines. Custom Pantone color, printing and surface finishing available; MOQ 5,000 units, factory-direct pricing.

Specifications

SKUSJT0521-20
MaterialPET
Capacity20 ml
Weight7 g
Neck Size18 mm
Total Height65 mm
Shoulder Height50 mm
Base Width28 mm
Base Depth28 mm
MOQ5,000 units
Lead Time15–25 days
CertificationISO 9001 / FDA / SGS
Request Quote →

📦 Download Catalog

Download the complete PET bottle catalog PDF for offline viewing.

PET Below 100ml PET 100-200ml PET 201-300ml PET Above 1000ml

Technical Specifications

Full engineering parameters for SJT0521-20. Nominal factory values — custom colors, printing and finishing available on all parameters below.

Dimensions & Capacity
Nominal Capacity20 ml (0.7 fl oz)
Bottle Weight7 g
Neck Finish18 mm
Total Height65 mm
Shoulder Height50 mm
Base (W × D)28 × 28 mm
Material & Compliance
MaterialPET
Resin GradeFood-contact, virgin (non-recycled)
CertificationsISO 9001 / FDA / SGS
RecyclableYes
Packing & Order Info
Carton Pack1480 pcs / carton
Carton Dimensions (L×W×H)55 × 40 × 36 cm
MOQ5,000 units
Lead Time15–25 days

Technical Drawing

SJT0521-20 technical dimension drawing
Dimensional drawing of SJT0521-20 — all measurements in millimetres (nominal factory dimensions). For detailed tolerance specs, contact us.

Typical Applications

Typical applications for this small PET bottle: serums, facial toners, essential-oil blends, hand-sanitizer and travel-size skincare. The clear PET wall shows formula color, and the standard neck pairs with fine-mist sprayers, dropper or screw caps.

Recommended For

SJT0521-20 is a 20 ml PET bottle in the travel & sample size range. It suits clear toners, facial mists, shampoos and lightweight daily-care bottles, and is commonly specified for travel kits, hotel amenities, free samples and single-use sachets. The 18 mm neck is compatible with an 18/415 fine-mist sprayer or small disc-top cap, so it adapts to pu so it adapts to pump, spray or screw formats without mold changes.

Closure & Finishing

For branding, UV printing, hot-stamp and shrink sleeve are available on this PET body. Pair it with a matching an 18/415 fine-mist sprayer or small disc-top cap to complete a shelf-ready package at a 5,000 units MOQ, produced on ISO 9001 / FDA / SGS certified lines.

Frequently Asked Questions

Is this PET bottle made from food-contact, food-grade material?▼
Yes. ShiJin Package holds a domestic food-production license, and bottles in this range are made from food-contact, virgin (non-recycled) resin — the same material standard as food-contact packaging. Our core production is cosmetic, personal-care and household packaging; the food-contact grade is a material-safety guarantee, not a food-bottle product line.
Can I get this 20ml PET bottle with custom color and logo?▼
Yes. 20ml PET bottles accept Pantone color matching, silk-screen, hot-stamp or UV printing, labeling, and soft-touch/frosted/metallic finishing. Most projects reuse our existing mold library, so no new tooling cost.
Do you offer samples of SJT0521-20 before bulk ordering?▼
Yes - stock sjt0521-20 samples are free (you cover freight). Customized samples with your color or logo carry a small setup fee, refunded on orders above 10,000 units.

Engineering Notes — SJT0521-20

Everything below is calculated from the nominal dimensions in the specification table above (PET, 20 ml ≈ 0.7 fl oz, Ø18 mm neck). These figures are engineering guidance for label sizing, closure matching and freight planning — they are not a separate product specification, and final tolerances are confirmed on your approved sample.

Form, Fill & Label Profile

Body geometry
Body shapeRound body — 28 mm diameter across the base, 65 mm tall overall. A round format prints and labels evenly from any angle and reads as a premium cosmetic silhouette.
Height to width2.32 : 1 (65 mm tall, 28 mm wide). Mid-height format: stable on standard filling and labelling lines without rail changes.
Fill-to-outline ratio20 ml stated capacity inside a 51 ml rectangular outline — 39 %. Generous wall and shoulder clearance — a heavier, more premium feel in hand and more room for a deep shoulder radius. Fill line is normally set at 90–95 % of stated capacity.
Unit weight7 g body weight = 35.0 g per 100 ml. Heavy-wall range: chosen when the bottle must feel substantial or survive repeated squeezing.
Label & decoration zone
Usable label heightUp to 45 mm — from the base to the 50 mm shoulder line, less a 5 mm base transition. Taller artwork runs onto the shoulder with a curved-label option.
Body circumference88 mm (π × 28 mm) — a wrap-around label up to 81 mm wide fits with seam clearance.
Recommended maximum label size≈ 81 × 45 mm (W × H) wrap label, or a two-panel front/back set on the same circumference.
Neck & closure
Neck finishØ18 mm screw neck — the 18/410 or 18/415 industry standard, one of the most widely stocked closure sizes worldwide.
Dispensing optionsdropper, fine-mist sprayer or small disc-top cap.
Dosing noteAt 20 ml the Ø18 mm neck is the standard pairing and is normally run with a single- or double-dose pump. Tell us the dose you need per application (ml per stroke) and we match the pump or sprayer output to it.

Same-Family Options at a Glance

Nearest PET formats to this 20 ml model (15 ml, 15 ml, 30 ml, 30 ml), so you can compare a capacity step up or down without leaving the family. Every row is a stocked SKU with its own page and drawings.

SKUCapacityWeightNeckHeightDifference
SJT0076-3030 ml5 gØ20 mm100 mm+10 ml larger
SJT0094-3030 ml5 gØ18 mm86 mm+10 ml larger · same neck
SJT0521-2020 ml7 gØ18 mm65 mmThis model
SJT0587-1515 ml5 gØ18 mm69 mm5 ml smaller · same neck
SJT0484-515 ml5 gØ20 mm62 mm5 ml smaller

Related Engineering Guides

Request a quote for SJT0521-20

Tell us your quantity and target market — our engineering team replies within 2 working hours with pricing, lead time and samples. No registration required.

SJT0521-20

ISO 9001 / FDA / SGS certified MOQ 5,000 units Reply within 2 working hours