PET Cosmetic Bottle 250ml
Download the complete PET bottle catalog PDF for offline viewing.
Full engineering parameters for SJT0541-250. Nominal factory values — custom colors, printing and finishing available on all parameters below.
| Dimensions & Capacity | |
| Nominal Capacity | 250 ml (8.5 fl oz) |
| Bottle Weight | 25 g |
| Total Height | 58 mm |
| Shoulder Height | 44 mm |
| Base (W × D) | 88 × 88 mm |
| Material & Compliance | |
| Material | PET |
| Resin Grade | Food-contact, virgin (non-recycled) |
| Certifications | ISO 9001 / FDA / SGS |
| Recyclable | Yes |
| Packing & Order Info | |
| Carton Pack | 168 pcs / carton |
| Carton Dimensions (L×W×H) | 63 × 37.5 × 37.5 cm |
| MOQ | 5,000 units |
| Lead Time | 15–25 days |
Typical applications for this mid-size PET bottle: body lotion, hand wash, facial mist, shampoo and daily skincare. Its clarity and light weight suit retail shelves, while the neck accepts lotion pumps, sprayers or flip-top closures.
SJT0541-250 is a 250 ml PET bottle in the mid-format skincare range. It suits clear toners, facial mists, shampoos and lightweight daily-care bottles, and is commonly specified for face creams, lotions, cleansers and mid-size skincare. It works with standard screw, pump or flip-top closures to match your filling line.
For branding, UV printing, hot-stamp and shrink sleeve are available on this PET body. Pair it with a screw, pump or flip-top closure to complete a shelf-ready package at a 5,000 units MOQ, produced on ISO 9001 / FDA / SGS certified lines.
Everything below is calculated from the nominal dimensions in the specification table above (PET, 250 ml ≈ 8.5 fl oz). These figures are engineering guidance for label sizing, closure matching and freight planning — they are not a separate product specification, and final tolerances are confirmed on your approved sample.
| Body geometry | |
| Body shape | Round body — 88 mm diameter across the base, 58 mm tall overall. A round format prints and labels evenly from any angle and reads as a premium cosmetic silhouette. |
| Height to width | 0.66 : 1 (58 mm tall, 88 mm wide). Low-profile, wide-footed format: the most stable of the three under high-speed filling and the easiest to stack. |
| Fill-to-outline ratio | 250 ml stated capacity inside a 449 ml rectangular outline — 56 %. Typical wall and shoulder allowance for an injection- or extrusion-blown bottle of this size. Fill line is normally set at 90–95 % of stated capacity. |
| Unit weight | 25 g body weight = 10.0 g per 100 ml. Mid-weight range: the balance most buyers settle on between hand-feel and freight cost. |
| Label & decoration zone | |
| Usable label height | Up to 39 mm — from the base to the 44 mm shoulder line, less a 5 mm base transition. Taller artwork runs onto the shoulder with a curved-label option. |
| Body circumference | 276 mm (π × 88 mm) — a wrap-around label up to 254 mm wide fits with seam clearance. |
| Recommended maximum label size | ≈ 254 × 39 mm (W × H) wrap label, or a two-panel front/back set on the same circumference. |
Nearest PET formats to this 250 ml model (248 ml, 248 ml, 260 ml, 260 ml), so you can compare a capacity step up or down without leaving the family. Every row is a stocked SKU with its own page and drawings.
| SKU | Capacity | Weight | Neck | Height | Difference |
| SJT0001-260 | 260 ml | 25 g | Ø24 mm | 148 mm | +10 ml larger |
| SJT0031-260 | 260 ml | 30 g | Ø24 mm | 172 mm | +10 ml larger |
| SJT0541-250 | 250 ml | 25 g | Ø— mm | 58 mm | This model |
| SJT0254-248 | 248 ml | 30 g | Ø24 mm | 150 mm | 2 ml smaller |
| SJT0129-248 | 248 ml | 25 g | Ø28 mm | 171 mm | 2 ml smaller |
Tell us your quantity and target market — our engineering team replies within 2 working hours with pricing, lead time and samples. No registration required.
