PE Cosmetic Bottle 280ml
Download the complete PE / HDPE bottle catalog PDF.
Full engineering parameters for SJE1628-280. Nominal factory values — custom colors, printing and finishing available on all parameters below.
| Dimensions & Capacity | |
| Nominal Capacity | 280 ml (9.5 fl oz) |
| Overflow Capacity (brimful) | 350 ml (11.8 fl oz) |
| Bottle Weight | 35 g |
| Neck Finish | 42 mm |
| Total Height | 106 mm |
| Shoulder Height | 88 mm |
| Base (W × D) | 79 × 70 mm |
| Material & Compliance | |
| Material | PE/HDPE |
| Resin Grade | Food-contact, virgin (non-recycled) |
| Certifications | ISO 9001 / FDA / SGS |
| Recyclable | Yes |
| Packing & Order Info | |
| Carton Pack | 21 pcs / carton |
| Carton Dimensions (L×W×H) | 76 × 50 × 45 cm |
| MOQ | 5,000 units |
| Lead Time | 15–25 days |
Typical applications for this mid-size HDPE bottle: shampoo, conditioner, body wash, hand soap and general personal-care packaging. HDPE resists everyday chemicals and squeezes cleanly to the last drop.
SJE1628-280 is a 280 ml PE / HDPE bottle in the mid-format skincare range. It suits sunscreen, opaque lotions, body wash and chemical-sensitive formulations, and is commonly specified for face creams, lotions, cleansers and mid-size skincare. The 42 mm neck is compatible with standard screw, pump or flip-top closure, so it adapts to pump, spray or screw formats without mold changes.
For branding, silk-screen, hot-stamp and in-mold labeling are available on this PE / HDPE body. Pair it with a matching standard screw, pump or flip-top closure to complete a shelf-ready package at a 5,000 units MOQ, produced on ISO 9001 / FDA / SGS certified lines.
Everything below is calculated from the nominal dimensions in the specification table above (PE / HDPE, 280 ml ≈ 9.5 fl oz, Ø42 mm neck). These figures are engineering guidance for label sizing, closure matching and freight planning — they are not a separate product specification, and final tolerances are confirmed on your approved sample.
| Body geometry | |
| Body shape | Oval body — 79 × 70 mm base (1.13 : 1 width-to-depth). A softer cross-section that sits comfortably in the hand; artwork can run as a wrap or as two facing panels. |
| Height to width | 1.34 : 1 (106 mm tall, 79 mm wide). Low-profile, wide-footed format: the most stable of the three under high-speed filling and the easiest to stack. |
| Fill-to-outline ratio | 280 ml stated capacity inside a 586 ml rectangular outline — 48 %. Generous wall and shoulder clearance — a heavier, more premium feel in hand and more room for a deep shoulder radius. Fill line is normally set at 90–95 % of stated capacity. |
| Unit weight | 35 g body weight = 12.5 g per 100 ml. Mid-weight range: the balance most buyers settle on between hand-feel and freight cost. |
| Label & decoration zone | |
| Usable label height | Up to 83 mm — from the base to the 88 mm shoulder line, less a 5 mm base transition. Taller artwork runs onto the shoulder with a curved-label option. |
| Front panel width | 79 mm flat face → artwork up to 71 mm wide with a 4 mm safety margin each side. |
| Recommended maximum label size | ≈ 71 × 83 mm (W × H) flat label on each face, or a wrap label over the 70 mm sides for tamper evidence. |
| Neck & closure | |
| Neck finish | Ø42 mm screw neck — the 42/400 industry standard, one of the most widely stocked closure sizes worldwide. |
| Dispensing options | wide-mouth screw cap or large pump. |
| Dosing note | At 280 ml the Ø42 mm neck is the standard pairing and is normally run with a single- or double-dose pump. Tell us the dose you need per application (ml per stroke) and we match the pump or sprayer output to it. |
Nearest PE / HDPE formats to this 280 ml model (268 ml, 260 ml, 300 ml, 300 ml), so you can compare a capacity step up or down without leaving the family. Every row is a stocked SKU with its own page and drawings.
| SKU | Capacity | Weight | Neck | Height | Difference |
| SJE0061-300 | 300 ml | 36 g | Ø24 mm | 141 mm | +20 ml larger |
| SJE0098-300 | 300 ml | 46 g | Ø28 mm | 97 mm | +20 ml larger |
| SJE1628-280 | 280 ml | 35 g | Ø42 mm | 106 mm | This model |
| SJE1626-268 | 268 ml | 27 g | Ø24 mm | 183 mm | 12 ml smaller |
| SJE0190-260 | 260 ml | 32 g | Ø24 mm | 165 mm | 20 ml smaller |
Tell us your quantity and target market — our engineering team replies within 2 working hours with pricing, lead time and samples. No registration required.
