PETG Cosmetic Bottle 100ml
Download the complete PET bottle catalog PDF for offline viewing.
Full engineering parameters for SJE1756-100. Nominal factory values — custom colors, printing and finishing available on all parameters below.
| Dimensions & Capacity | |
| Nominal Capacity | 100 ml (3.4 fl oz) |
| Bottle Weight | 22 g |
| Neck Finish | 38MM |
| Total Height | 85 mm |
| Shoulder Height | 70 mm |
| Base (W × D) | 70 × 50 mm |
| Material & Compliance | |
| Material | PETG |
| Resin Grade | Food-contact, virgin (non-recycled) |
| Certifications | ISO 9001 / FDA / SGS |
| Recyclable | Yes |
| Packing & Order Info | |
| Carton Pack | Confirmed per order — contact us for exact carton specs |
| MOQ | 5,000 units |
| Lead Time | 15–25 days |
Typical applications for this PETG bottle: premium skincare, fragrance, treatment lines and cosmetic products where glass-like clarity is part of the shelf appeal. PETG also suits formulas with higher alcohol or essential-oil content.
SJE1756-100 is a 100 ml PETG bottle in the travel & trial size range. It suits premium skincare, high-clarity serums, boutique cosmetics and display jars, and is commonly specified for travel-size toiletry, trial kits, hotel amenities and promotional samples. The 38 mm neck is compatible with standard screw, pump or flip-top closure, so it adapts to pump, spray or screw formats without mold changes.
For branding, UV printing, silk-screen and hot-stamp with no surface pretreatment are available on this PETG body. Pair it with a matching standard screw, pump or flip-top closure to complete a shelf-ready package at a 5,000 units MOQ, produced on ISO 9001 / FDA / SGS certified lines.
Everything below is calculated from the nominal dimensions in the specification table above (PETG, 100 ml ≈ 3.4 fl oz, Ø38 mm neck). These figures are engineering guidance for label sizing, closure matching and freight planning — they are not a separate product specification, and final tolerances are confirmed on your approved sample.
| Body geometry | |
| Body shape | Oval body — 70 × 50 mm base (1.40 : 1 width-to-depth). A softer cross-section that sits comfortably in the hand; artwork can run as a wrap or as two facing panels. |
| Height to width | 1.21 : 1 (85 mm tall, 70 mm wide). Low-profile, wide-footed format: the most stable of the three under high-speed filling and the easiest to stack. |
| Fill-to-outline ratio | 100 ml stated capacity inside a 298 ml rectangular outline — 34 %. Generous wall and shoulder clearance — a heavier, more premium feel in hand and more room for a deep shoulder radius. Fill line is normally set at 90–95 % of stated capacity. |
| Unit weight | 22 g body weight = 22.0 g per 100 ml. Heavy-wall range: chosen when the bottle must feel substantial or survive repeated squeezing. |
| Label & decoration zone | |
| Front panel width | 70 mm flat face → artwork up to 62 mm wide with a 4 mm safety margin each side. |
| Neck & closure | |
| Neck finish | Ø38 mm screw neck — the 38/400 industry standard, one of the most widely stocked closure sizes worldwide. |
| Dispensing options | wide-mouth screw cap or large pump. |
| Dosing note | At 100 ml the Ø38 mm neck is the standard pairing and is normally run with a single- or double-dose pump. Tell us the dose you need per application (ml per stroke) and we match the pump or sprayer output to it. |
Nearest PETG formats to this 100 ml model (200 ml, 250 ml), so you can compare a capacity step up or down without leaving the family. Every row is a stocked SKU with its own page and drawings.
| SKU | Capacity | Weight | Neck | Height | Difference |
| SJE1684-250 | 250 ml | 27 g | Ø24 mm | 132 mm | +150 ml larger |
| SJE1823-200 | 200 ml | 33 g | Ø20 mm | 146 mm | +100 ml larger |
| SJE1756-100 | 100 ml | 22 g | Ø38 mm | 85 mm | This model |
Tell us your quantity and target market — our engineering team replies within 2 working hours with pricing, lead time and samples. No registration required.
