PE Cosmetic Bottle 350ml
Download the complete PE / HDPE bottle catalog PDF.
Full engineering parameters for SJE1847-350. Nominal factory values — custom colors, printing and finishing available on all parameters below.
| Dimensions & Capacity | |
| Nominal Capacity | 350 ml (11.8 fl oz) |
| Bottle Weight | 46 g |
| Total Height | 87 mm |
| Shoulder Height | 71 mm |
| Base (W × D) | 86 × 86 mm |
| Material & Compliance | |
| Material | PE/HDPE |
| Resin Grade | Food-contact, virgin (non-recycled) |
| Certifications | ISO 9001 / FDA / SGS |
| Recyclable | Yes |
| Packing & Order Info | |
| Carton Pack | 140 pcs / carton |
| Carton Dimensions (L×W×H) | 66 × 50 × 38 cm |
| MOQ | 5,000 units |
| Lead Time | 15–25 days |
Typical applications for this mid-size HDPE bottle: shampoo, conditioner, body wash, hand soap and general personal-care packaging. HDPE resists everyday chemicals and squeezes cleanly to the last drop.
SJE1847-350 is a 350 ml PE / HDPE bottle in the body & hair-care size range. It suits sunscreen, opaque lotions, body wash and chemical-sensitive formulations, and is commonly specified for body lotions, shampoos, conditioners and shower gels. It works with standard screw, pump or flip-top closures to match your filling line.
For branding, silk-screen, hot-stamp and in-mold labeling are available on this PE / HDPE body. Pair it with a screw, pump or flip-top closure to complete a shelf-ready package at a 5,000 units MOQ, produced on ISO 9001 / FDA / SGS certified lines.
Everything below is calculated from the nominal dimensions in the specification table above (PE / HDPE, 350 ml ≈ 11.8 fl oz). These figures are engineering guidance for label sizing, closure matching and freight planning — they are not a separate product specification, and final tolerances are confirmed on your approved sample.
| Body geometry | |
| Body shape | Round body — 86 mm diameter across the base, 87 mm tall overall. A round format prints and labels evenly from any angle and reads as a premium cosmetic silhouette. |
| Height to width | 1.01 : 1 (87 mm tall, 86 mm wide). Low-profile, wide-footed format: the most stable of the three under high-speed filling and the easiest to stack. |
| Fill-to-outline ratio | 350 ml stated capacity inside a 643 ml rectangular outline — 54 %. Typical wall and shoulder allowance for an injection- or extrusion-blown bottle of this size. Fill line is normally set at 90–95 % of stated capacity. |
| Unit weight | 46 g body weight = 13.1 g per 100 ml. Mid-weight range: the balance most buyers settle on between hand-feel and freight cost. |
| Label & decoration zone | |
| Usable label height | Up to 66 mm — from the base to the 71 mm shoulder line, less a 5 mm base transition. Taller artwork runs onto the shoulder with a curved-label option. |
| Body circumference | 270 mm (π × 86 mm) — a wrap-around label up to 249 mm wide fits with seam clearance. |
| Recommended maximum label size | ≈ 249 × 66 mm (W × H) wrap label, or a two-panel front/back set on the same circumference. |
Nearest PE / HDPE formats to this 350 ml model (300 ml, 300 ml, 360 ml, 360 ml), so you can compare a capacity step up or down without leaving the family. Every row is a stocked SKU with its own page and drawings.
| SKU | Capacity | Weight | Neck | Height | Difference |
| SJE1633-360 | 360 ml | 39 g | Ø24 mm | 147 mm | +10 ml larger |
| SJE1827-360 | 360 ml | 47 g | Ø28 mm | 176 mm | +10 ml larger |
| SJE1847-350 | 350 ml | 46 g | Ø— mm | 87 mm | This model |
| SJE1913-300 | 300 ml | 35 g | Ø32 mm | 128 mm | 50 ml smaller |
| SJE1892-300 | 300 ml | 33 g | Ø20 mm | 171 mm | 50 ml smaller |
Tell us your quantity and target market — our engineering team replies within 2 working hours with pricing, lead time and samples. No registration required.
