PET Cosmetic Bottle 300ml
Download the complete PET bottle catalog PDF for offline viewing.
Full engineering parameters for SJT0426-300. Nominal factory values — custom colors, printing and finishing available on all parameters below.
| Dimensions & Capacity | |
| Nominal Capacity | 300 ml (10.1 fl oz) |
| Overflow Capacity (brimful) | 340 ml (11.5 fl oz) |
| Bottle Weight | 30 g |
| Neck Finish | 22/410 |
| Total Height | 168 mm |
| Shoulder Height | 146 mm |
| Base (W × D) | 60 × 60 mm |
| Material & Compliance | |
| Material | PET |
| Resin Grade | Food-contact, virgin (non-recycled) |
| Certifications | ISO 9001 / FDA / SGS |
| Recyclable | Yes |
| Packing & Order Info | |
| Carton Pack | 360 pcs / carton |
| Carton Dimensions (L×W×H) | 76 × 50 × 52 cm |
| MOQ | 5,000 units |
| Lead Time | 15–25 days |
Typical applications for this mid-size PET bottle: body lotion, hand wash, facial mist, shampoo and daily skincare. Its clarity and light weight suit retail shelves, while the neck accepts lotion pumps, sprayers or flip-top closures.
SJT0426-300 is a 300 ml PET bottle in the mid-format skincare range. It suits clear toners, facial mists, shampoos and lightweight daily-care bottles, and is commonly specified for face creams, lotions, cleansers and mid-size skincare. The 22 mm neck is compatible with standard screw, pump or flip-top closure, so it adapts to pump, spray or screw formats so it adapts to pump, spray or screw formats without mold changes.
For branding, UV printing, hot-stamp and shrink sleeve are available on this PET body. Pair it with a matching standard screw, pump or flip-top closure to complete a shelf-ready package at a 5,000 units MOQ, produced on ISO 9001 / FDA / SGS certified lines.
Everything below is calculated from the nominal dimensions in the specification table above (PET, 300 ml ≈ 10.1 fl oz, Ø22 mm neck). These figures are engineering guidance for label sizing, closure matching and freight planning — they are not a separate product specification, and final tolerances are confirmed on your approved sample.
| Body geometry | |
| Body shape | Round body — 60 mm diameter across the base, 168 mm tall overall. A round format prints and labels evenly from any angle and reads as a premium cosmetic silhouette. |
| Height to width | 2.80 : 1 (168 mm tall, 60 mm wide). Tall profile: the height carries shelf presence while the carton footprint per unit stays small. |
| Fill-to-outline ratio | 300 ml stated capacity inside a 605 ml rectangular outline — 50 %. Generous wall and shoulder clearance — a heavier, more premium feel in hand and more room for a deep shoulder radius. Fill line is normally set at 90–95 % of stated capacity. |
| Unit weight | 30 g body weight = 10.0 g per 100 ml. Mid-weight range: the balance most buyers settle on between hand-feel and freight cost. |
| Label & decoration zone | |
| Usable label height | Up to 141 mm — from the base to the 146 mm shoulder line, less a 5 mm base transition. Taller artwork runs onto the shoulder with a curved-label option. |
| Body circumference | 188 mm (π × 60 mm) — a wrap-around label up to 173 mm wide fits with seam clearance. |
| Recommended maximum label size | ≈ 173 × 141 mm (W × H) wrap label, or a two-panel front/back set on the same circumference. |
| Neck & closure | |
| Neck finish | Ø22 mm screw neck — the 22/410 industry standard, one of the most widely stocked closure sizes worldwide. |
| Dispensing options | treatment pump or fine-mist sprayer. |
| Dosing note | At 300 ml the Ø22 mm neck is the standard pairing and is normally run with a single- or double-dose pump. Tell us the dose you need per application (ml per stroke) and we match the pump or sprayer output to it. |
Nearest PET formats to this 300 ml model (280 ml, 280 ml, 320 ml, 320 ml), so you can compare a capacity step up or down without leaving the family. Every row is a stocked SKU with its own page and drawings.
| SKU | Capacity | Weight | Neck | Height | Difference |
| SJT0077-320 | 320 ml | 35 g | Ø28 mm | 190 mm | +20 ml larger |
| SJT0475-320 | 320 ml | 35 g | Ø28 mm | 161 mm | +20 ml larger |
| SJT0426-300 | 300 ml | 30 g | Ø22 mm | 168 mm | This model |
| SJT0414-280 | 280 ml | 25 g | Ø24 mm | 151 mm | 20 ml smaller |
| SJT0351-280 | 280 ml | 35 g | Ø28 mm | 166 mm | 20 ml smaller |
Tell us your quantity and target market — our engineering team replies within 2 working hours with pricing, lead time and samples. No registration required.
