PET Cosmetic Bottle 150ml
Download the complete PET bottle catalog PDF for offline viewing.
Full engineering parameters for SJT0559-150. Nominal factory values — custom colors, printing and finishing available on all parameters below.
| Dimensions & Capacity | |
| Nominal Capacity | 150 ml (5.1 fl oz) |
| Bottle Weight | 22 g |
| Total Height | 60 mm |
| Shoulder Height | 48 mm |
| Base (W × D) | 70 × 70 mm |
| Material & Compliance | |
| Material | PET |
| Resin Grade | Food-contact, virgin (non-recycled) |
| Certifications | ISO 9001 / FDA / SGS |
| Recyclable | Yes |
| Packing & Order Info | |
| Carton Pack | 252 pcs / carton |
| Carton Dimensions (L×W×H) | 55 × 40 × 36 cm |
| MOQ | 5,000 units |
| Lead Time | 15–25 days |
Typical applications for this small PET bottle: serums, facial toners, essential-oil blends, hand-sanitizer and travel-size skincare. The clear PET wall shows formula color, and the standard neck pairs with fine-mist sprayers, dropper or screw caps.
SJT0559-150 is a 150 ml PET bottle in the daily face-care size range. It suits clear toners, facial mists, shampoos and lightweight daily-care bottles, and is commonly specified for facial serums, essences, toners and daily moisturizers. It works with standard screw, pump or flip-top closures to match so it adapts to pump, spray or screw formats without mold changes.
For branding, UV printing, hot-stamp and shrink sleeve are available on this PET body. Pair it with a screw, pump or flip-top closure to complete a shelf-ready package at a 5,000 units MOQ, produced on ISO 9001 / FDA / SGS certified lines.
Everything below is calculated from the nominal dimensions in the specification table above (PET, 150 ml ≈ 5.1 fl oz). These figures are engineering guidance for label sizing, closure matching and freight planning — they are not a separate product specification, and final tolerances are confirmed on your approved sample.
| Body geometry | |
| Body shape | Round body — 70 mm diameter across the base, 60 mm tall overall. A round format prints and labels evenly from any angle and reads as a premium cosmetic silhouette. |
| Height to width | 0.86 : 1 (60 mm tall, 70 mm wide). Low-profile, wide-footed format: the most stable of the three under high-speed filling and the easiest to stack. |
| Fill-to-outline ratio | 150 ml stated capacity inside a 294 ml rectangular outline — 51 %. Typical wall and shoulder allowance for an injection- or extrusion-blown bottle of this size. Fill line is normally set at 90–95 % of stated capacity. |
| Unit weight | 22 g body weight = 14.7 g per 100 ml. Heavy-wall range: chosen when the bottle must feel substantial or survive repeated squeezing. |
| Label & decoration zone | |
| Usable label height | Up to 43 mm — from the base to the 48 mm shoulder line, less a 5 mm base transition. Taller artwork runs onto the shoulder with a curved-label option. |
| Body circumference | 220 mm (π × 70 mm) — a wrap-around label up to 202 mm wide fits with seam clearance. |
| Recommended maximum label size | ≈ 202 × 43 mm (W × H) wrap label, or a two-panel front/back set on the same circumference. |
Nearest PET formats to this 150 ml model (130 ml, 130 ml, 160 ml, 160 ml), so you can compare a capacity step up or down without leaving the family. Every row is a stocked SKU with its own page and drawings.
| SKU | Capacity | Weight | Neck | Height | Difference |
| SJT0043-160 | 160 ml | 15 g | Ø20 mm | 156 mm | +10 ml larger |
| SJT0182-160 | 160 ml | 19 g | Ø24 mm | 167 mm | +10 ml larger |
| SJT0559-150 | 150 ml | 22 g | Ø— mm | 60 mm | This model |
| SJT0249-130 | 130 ml | 19 g | Ø24 mm | 145 mm | 20 ml smaller |
| SJT0009-130 | 130 ml | 15 g | Ø20 mm | 138 mm | 20 ml smaller |
Tell us your quantity and target market — our engineering team replies within 2 working hours with pricing, lead time and samples. No registration required.
